Бележки към издание InstalSystem 5

от HelpSystem
Направо към: навигация, търсене
Продукт InstalSystem 5
Вид статия Продуктова информация
Актуално съдържание за версия 2020-04-04


RELEASE Rev. 18.1 (planned date of publication 23.04.2020*)

* The scheduled date of publication may change. It is presented for information purposes only. InstalSoft is not obliged to release the publication on this date

RELEASE Rev. 18.0


Основен модул

  • Change of the program architecture to 64-bit. That means there is a possibility to use all of the computer's RAM available. Previous publications, which were in 32-bit architecture, could only use 4GB of RAM.
  • Improvements in the program performance:
    - faster response to switching between two types of elements Работен лист
    - faster loading of 3D изглед content
    - faster opening of files containing DWG/DXF основа
    - reduced time of Изчисление на сградна конструкция
    - reduced time of Топлинни изчисления на сграда
  • Improvements of the algorithm which creates Автоматичен схематичен изглед на система
  • New diagnostic messages related to the function Автоматичен схематичен изглед на система.
    The contested elements are indicated in the graphic editor.
  • New graphic presentation of the Крайна точка на схематичен изглед for schematic view.
  • Symbols of the element Начална точка are generated automatically after using the function Създай for Автоматичен схематичен изглед на система.
  • Selection of item Фрагмент на инсталация on Тип на лист: Схематичен изглед references to item Крайна точка на схематичен изглед on Тип на лист: Изглед в план.
  • New hints on Status Bar informing about active keys during insertion of the elements.
  • Improved АВТО mode and ОРТО mode for drawing of building structure.
  • Possibility to edit Покрив element on 3D изглед.
  • Possibility to define roof slope with automatic calculation of elevation of ordinates for Покрив.
  • Dormers are included in calculations of Кубатура на помещение.
  • Change in organization of Ribbon in Конструкция section:
    - Buttons are sorted in order of recommended path of use for building structure designing
    - Button Автоматични стени, плочи и покриви moved to the Конструкция section.
  • New diagnostic related to wall connections after using Автоматични стени, плочи и покриви function, informing about detected irregularities.
  • New Стилове на елемент 2D and 3D on Конструкция scope supporting the design and verification of the building structure.
  • New tool Поправка на геометрия на стена enables automatic correction of building structure by using functions:
    - Коригирай стенни връзки
    - Поправи дебелина на стена, enables getting the same walls thickness in entire project.
    - Поправи ъгли на стени, enables the correction of parallelism / perpendicularity of walls relative to each other
    - Коригирай позиция м/у етажи, enables the correction of the position and displacement of walls between storeys with the possibility of indicating a reference storey.
    Tool is available on Ribbon in Конструкция section.
  • New, precise diagnostic messages for Изчисление на сградна конструкция, facilitate correct edition of the building structure.
  • Improvement of diagnostic message: Има препокриващи се или неправилно свързани стени - messages are grouped and there is more precise indication of walls affecting incorrect Изчисление на сградна конструкция
  • Possibility of more accurate location of the Относителна точка element because of more accurate impact of АВТО mode for snapping to DWG underlays elements (also axis)
  • New Маркер за многоетажно помещение in Многоетажно помещени label.

Отоплителни системи

  • Added Автоматични етикети for Участъци in Начална точка (топлинни инсталации) data.

Топлинни загуби

  • The user interface was changed in the scope of specific data of rooms and building units, unifying it with other program modules. Special editors have been left for cooling partitions in rooms and for partition definitions.
  • Improvements in Топлинни изчисления на сграда based on a properly defined building structure..

Питейни-битови водни системи

  • The possibility of calculations according to the EN 806-3 standard.
  • Автоматичен схематичен изглед на система - new functionality available - BETA version

RELEASE Rev. 17.5

  • Update of product catalogues.

RELEASE Rev. 17.4

  • Update of product catalogues.

RELEASE Rev. 17.3

  • Update of product catalogues.

Articles in HelpSystem:

RELEASE Rev. 17.2

  • Update of product catalogues.

Articles in HelpSystem:

Издание Rev. 17.1

  • В тази версия няма значителни функционални промени.

Издание Rev. 17.0

Основен модул

  • When inserting an opening in a sloping roof plane, the "z" coordinates of corner points are determined automatically
  • In the Управление на етажи window, the values Етажна кота and Етажна височина are editable, and the complement each other for adjacent stories
  • For the top floor, Кота било на покрив property has been added, the change of which corrects the height of that floor
  • The option of distinguishing the style and label of a "manual" room (drawn directly) from "automatic" (generated automatically based on the arrangement of walls and slabs) has been introduced.
  • When drawing elements "roof edge", Отвор в покрива, Капандура in AUTO mode, snapping to DWG base elements is carried out
  • In the calculations of the building structure, Има препокриващи се или неправилно свързани стени diagnostics was introduced. The contested elements are indicated in the graphical editor
  • In the Настройки tab, sub-tab: Изглед на екрана, checkbox Деактивирай разширено представяне на прозрачност в3D' has been added. Checking can make it easier to work on computers with weaker graphics cards.
  • The 'Положение tab has been added to the configuration of element label styles, where you can specify the default position of the label relative to the parent.

Отоплителни системи

  • Автоматичен схематичен изглед на система - new functionality available - BETA version
  • The Котел element was introduced as one of the possible properties of the element Източник in the field Графично представяне
  • Enabled declaration of dimensions of Терминален прибор element from 1 cm.

Лъчисто сключени системи

  • Ergonomy of corrections of pipe loops and pipe feeds drawings generated automatically and drawn manually has been improved.
  • New criterion of pipe feeds arrangement -AUTO- has been added to Трасе на тръбни серпентини tool.

Лъчисто панелни системи

  • In the general data and in the data table of the element Зона на таванни панели the possibility of declaration of automatic placement of adjacent rows of panels in the zone with mutual offset has been introduced.

Питейни-битови водни системи

  • For sanitary appliances, it is possible to declare the frame.
  • A declaration of default manifold types has been introduced in the general data.

Статии в HelpSystem:

Издание Rev. 16.2

  • В тази версия няма значителни функционални промени.

Articles in HelpSystem:

Издание Rev. 16.1

  • В тази версия няма значителни функционални промени.

Articles in HelpSystem:

Издание Rev. 16.0


Основен модул

  • Many elements of the installation (radiator, valve, pump, etc.) by default are inserted with label.
  • Possibility of precise control of pipe-runs arrangement, with different ordinates of the beginning and end of the pipe-run (case of pipe-runs carried out in inclined ceilings / walls).

Отоплителни системи

  • Possibility to declare (Общи данни window, Управление на етажи tab) the default distance from the floor separately of the supply and return pipe-runs.

Питейни-битови водни системи

  • Possibility to declare (Общи данни window, Управление на етажи tab) the default distance from the floor separately of the hot water, cold water and circulation pipe-runs.
  • Rearrangement of general data tabs.
  • New element of the installation - linear drain.

Плоски станции

  • New module enabling the design of heating and water supply installations with the use of flat stations.

Статии в HelpSystem:

RELEASE Rev. 15.3

  • В тази версия няма значителни функционални промени.

Издание Rev. 15.2

  • В тази версия няма значителни функционални промени.

Издание Rev. 15.1

Основен модул

  • List of elements displayed in window Проектен браузър ia automatically adapted to currently edited edit scope.
  • Каталози window - tabs have been replaced by more precise catalogue filters
  • Window 3D изглед - possibility to display edges of the elements (available under the button Покажи ръбове/Скрий ръбове in section Изглед)
  • The ability to generate rooms, whose whole area is located in another room

Отоплителни системи/ Охладителни системи

  • Settings from tab Вентили и арматури - видове и данни по подразбиране have been moved to tabs: Разпределителна система-Видове и данни по подразбиране and Радиатори-Радиатори/Радиаторни вентили - типове и данни по подразбиране (tab Вентили и арматури - видове и данни по подразбиране has been removed).

Топлинни загуби

  • Enabling module Топлинни изчисления на сграда automatically switches common project setting: Метод на изчисление Φ into variant Изчислен съгл. коефицент
  • Enabled correction of room internal temperature (θi,О) of standard room types.

Лъчисто сключени системи

  • Manifold can be placed on a drawing in horizontal position or with upward outlet ports (configuration via new field in data table Ориентация).
  • In the tab Допълнителни опции in Общи данни window Специфични пазарни опции has been added - possibility to choose the method of the calculation without a surplus to flow rate for compensation of heat flow to the other side of the Отоплително-охлаждаща повърхност

Лъчисто панелни системи

  • Таблица с данни window of element Стенен панел/Тавенен панел - Δpмакс. field has been added thus enabling control of maximum pressure drop in single panel or set of panels in serial connection.

Питейни-битови водни системи

  • Water supply installations designing module - availability depending on package

Articles in HelpSystem:

Издание Rev. 14.2

  • The amount and content of neutral product databases available in different language versions has been unified, what will facilitate the transfer of projects between versions.

Издание Rev. 14.1

  • В тази версия няма значителни функционални промени.

Articles in HelpSystem:

Издание Rev. 14.0

Модули:

Основен модул

  • A new access to PDF creation of text printouts. If the appropriate driver is installed in the system, the program uses it and provides the Печат към PDF button directly in the print module's toolbar.
  • Possibility to declare the angle (rotation) of fittings (valve, filter etc.) relative to the pipeline axis (Window: Таблица с данни, field: Ъгъл на завъртане).
  • New (separate) style and label for the Контур на сграда element.
  • New field Разстояние от пода in the data table of the element Участък. Facilitates the control of the elevation of the network and allows correct copying of the repetitive installation to other floors.
  • Attractive graphic styles of certain elements in 3D изглед, including elements of the building structure.

Лъчисто сключени системи

  • Графика на оптимизация presenting the quality of supply temperature (θs,О rad) in consideration of heating requirements of zones. Available in window Общи данни on the tab: Източници, after first calculations.
  • New templates for Таблица на колектор
  • New field Конструктивен панел in window Общи данни on the tab: Подови системи allows declaration of default system plate.

Топлинни загуби

  • Improvement of the algorithm recognizing the area of the wall above the windows in a wall adjacent to ground, located entirely below the ground.

Статии в HelpSystem:

Издание Rev. 13.3

Модули:

Основен модул

  • Improvements of algorithm responsible for shaping the roof slopes

Издание Rev. 13.2

  • В тази версия няма значителни функционални промени.

Издание Rev. 13.1

Modules:

Основен модул

  • Rearrangement of icons in Конструкция

Лъчисто сключени системи

  • Reconstruction and improvements of Интерактивни изчисления на лъчисти системи

Издание Rev. 13.0

Модули:

Основен модул

  • Headers of result tables can be locked and visible while scrolling tables.

Топлинни загуби

  • Possibility to assign thermal partition definition (with defined U value) to construction partition of the same type, irrespective to its thickness.

Лъчисто сключени системи

  • Pipe-feeds for underfloor heating/cooling system can be laid in insulation layer (below heating/cooling pipes in the screed)
  • Possibility to change orientation (vertically or horizontally) of the Смесител / Помпен агрегат.
  • New label for element Смесител / Помпен агрегат.
  • Диаграма на смесител / контролна единица
  • Improvements of algorithm which determines supply temperature for radiant systems.
  • Improvements of algorithm which divides element Отоплителна/Охладителна зона into Отоплително-охлаждаща повърхност.
  • Diagnostics of laminar flow.

Отоплителни системи and Охладителни системи

  • More connection variants for element Терминален прибор.

Articles in HelpSystem:

Издание Rev. 12.2

Модули:

Основен модул Пакетен мениджър

  • Improvement of Autosave function

  • Implemented cooling system module - availability depending on package

Издание Rev. 12.1

  • There were no significant functional changes in this release.

Издание Rev. 12.0

Модули:

Основен модул i Пакетен мениджър

  • Improvement of АВТО mode.
  • Diagnostics of available graphics cards.

Оразмеряване на радиатори

  • Display of radiator output for manually selected sizes through the Таблица с данни.

  • Improvement of readability of Таблица на колектор.
  • Improvement of algorithm determining drop of temperature on the set of serially connected panels.

Издание Rev. 11.0

Модули:

Основен модул i Пакетен мениджър'

  • Improved function Автоматични стени, плочи и покриви.
  • Improved zoom scale and the preview scale.
  • Improved diagnostics concerning errors in the building structure.
  • Supplemented information presented in the result tables.
  • Integration of Размер на хартия element with Отпечатване на страници element.

Лъчисто сключени системи

  • Improved algorithm of heat output calculations of Heated by pipe feeds floor type connected virtually.
  • Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.

Отоплителни системи

  • Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).

Лъчисто панелни системи

  • Improved flow rates calculations for the serial-connected panels.

Издание Rev. 9.2

  • There were no significant functional changes in this release.

Издание Rev. 9.1

  • There were no significant functional changes in this release.

Издание Rev. 9.0

Модули:

Основен модул i Пакетен мениджър

  • Added declare multi-wing doors and windows.
  • Added the appearance configuration of the Относителна точка.
  • AUTO mode has been extended of snap the vertices Отвор в плоча to elements from the DWG underlay.

  • Improved algorithm of insert Heating floor in multi-storey rooms (with Opening in slab).
  • Implemented automatic algorithm which cuts Heating wall lying in the area of windows / doors.

  • Added the possibility of defining Tolerance relative to thickness of graphical partition (wall, ceilings and roofs), that the Partition definitions will be assign.

  • Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
  • Maximum height position for the panels has been increased to 30 m.
  • Expanded information of the flow rate for panel hint and panel label.

Издание Rev. 8.0

Модули:

Основен модул i Пакетен мениджър

  • Improved diagnostics for incomplete data when Generate walls and slabs from rooms and building contour algorithm has launched.
  • Room label - added the ability of display the Описание field.
  • Added the possibilty of creating default room types (with their data and parameters).
  • Added configure the appearance of elements during their insertion operations.
  • Improved the ergonomy of filling graphic elements data.

  • Changed diagnostics from error to warning for Partition definitions with no thickness filled for Part. with specified U (Heat transfer coefficient).

Издание Rev. 7.3

  • There were no significant functional changes in this release.

Издание Rev. 7.2

Модули:

Основен модул и Пакетен мениджър

  • New diagnostic messages for incorrect or incomplete building structure data have been introduced.
  • The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).

  • "Zone of ceiling panels" tool has been improved and developed.

Articles in HelpSystem:

Издание Rev. 6.1

Модули:

Основен модул i Пакетен мениджър

  • Added A0 and A1 formats to printout pages.
  • Improved AUTO and ORTO modes.

Оразмеряване на радиатори

  • Added possibility to display in radiator’s label setting of valves insert.
  • Allowed defining in project options default distance of radiator from wall.
  • Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.

  • Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
  • Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
  • Improved algorithm of automatic drawings of radiant heating/cooling loops.

Articles in HelpSystem:

Издание Rev. 5.1

  • There were no significant functional changes in this release.

Издание Rev. 5.0

Модули:

Основен модул i Пакетен мениджър

  • Added dimension lines.

  • Improved the algorithm of automatic division of heating/cooling floor zone.
  • Improved presentation of RHC loop drawing on 3D view.
  • Extended functionality of pipe feed route to automatically fill the entire width of the stip with pipe feeds.

Articles in HelpSystem:

Издание Rev. 4.0

Модули:

  • Improved the algorithm drawing the RHC loop.

  • Added ceiling panels zone - tool for automatic stacking of ceiling panels.

Articles in HelpSystem:

Издание Rev. 2.2

Модули:

Основен модул i Пакетен мениджър

  • Added possibility to saved files read-only.
  • 3D view printout has been avaliable.

Articles in HelpSystem:

Издание Rev. 2.1

  • There were no significant functional changes in this release..

Издание Rev. 2.0

Initial scope of modules:

  • Основен модул i Пакетен мениджър
  • Оразмеряване на радиатори
  • Interface gbXML (BIM)

Initial state of information materials