Редактиране на тръбни серпентини в лъчиста система: Разлика между версии

Версия от 09:26, 11 ноември 2017

Продукт	InstalSystem 5
Вид статия	FUNCTION AND TOOL
Актуално съдържание за версия	IS 5.0 Beta 33

Description

The Тръбна серпентина components connect Колектори with proper Отоплителна/охладителна повърхност components. The Тръбна серпентина components can be generated automatically in the required number and with maintained pipe spacing using the Трасе на тръбни серпентини component. Alternatively, pipe feeds can be arranged manually using the Участък component.

Location in the program

Трасе на тръбни серпентини is available in section on the Главни ленти с инструменти toolbar, for the active editing scopes Лъчисти подове, стени or Лъчисти тавани.

The Участък component is available in the Разпределение - отоплителни инсталации section on the Главни ленти с инструменти toolbar for the enabled editing scopes: Лъчисти подове, стени, Лъчисти тавани or Конвекция.
The Тръбна серпентина component is inserted using the Участък or Pipe run pair component. Distinguishing between Тръбна серпентина and Участък is done automatically depending on whether it is connected to a Отоплителна/Охладителна зона or to other component.

Example of use

Трасе на тръбни серпентини - automatic generation of pipe feeds

Important properties

Number of generated pipe feed pairs - the program automatically generates the number of required pipe feed pairs depending on the number of Отоплителна/охладителна повърхностs formed after division of the connected Отоплителна/Охладителна зона.
Pipe feed orientation in relation to section of pipe feed route - indicates on which side of the section of Трасе на тръбни серпентини should the pipe feeds be generated.
Широчина на лента
- - maximum width of the band within which the generated pipe feeds are arranged will depend on the number of the required pipe feed pairs.
- Определен от Потребителя - maximum width of the band within which the generated pipe feeds are arranged will be as specified by the user.
Начин за определяне на разстояние м/у тръбни серпентини
- От Отоп./Охл. зона - spacing of the generated pipe feeds will correspond to the pipe spacing in Отоплителна/Охладителна зона across which the Трасе на тръбни серпентини runs.
- - spacing of the generated pipe feeds will correspond to the settings in the Общи данни window.
- Определен от Потребителя - the adopted pipe spacing will be the closest to the specified value available in the Отоплителна/Охладителна зона system across which the Трасе на тръбни серпентини runs.
VA в целева О/Охл. повърхност - spacing of the generated pipe feeds to be arranged in Отоплителна/охладителна повърхност to which the Трасе на тръбни серпентини leads.
Изолация - pipe feed insulation.
% използвана мощност - percentage of utilized output of pipe feeds running across the Отоплителна/Охладителна зона.

Connecting to Колектори

The first segment of Трасе на тръбни серпентини should be connected to any point on the axis of the manifold (between the flow rail and return rail). Pipe feeds will be generated automatically in proper sequence and with min. spacing coresponding to the distance between connection points on the manifold rail.

Arranging the Трасе на тръбни серпентини

The arranging of Трасе на тръбни серпентини is facilitated by using the operating modes ОРТО and АВТО and the SHIFT key.

Connecting to Отоплителна/Охладителна зона

Point of connection of Трасе на тръбни серпентини to Отоплителна/Охладителна зона, the so-called "wifi" antenna - indicates the point where the specified Отоплителна/Охладителна зона is connected to Трасе на тръбни серпентини.

Correction of connection of Трасе на тръбни серпентини with Отоплителна/Охладителна зона.
After making proper connection within the connected Отоплителна/Охладителна зона, a "wifi" antenna symbol appears. If there is no "wifi" antenna symbol at the connection point, drag the hot-point at the end of the Трасе на тръбни серпентини section with the left mouse button pressed to within the Отоплителна/Охладителна зона area until green highlighting appears. Release the left mouse button. It is possible to connect one section of Трасе на тръбни серпентини to the corner of several adjacent Отоплителна/Охладителна зонаs (see the video).

Disconnecting Трасе на тръбни серпентини from Отоплителна/Охладителна зона.
If the connection point has been set improperly, it can be modified manually. To disconnect Трасе на тръбни серпентини, follow the operations described above with the SHIFT key pressed - the green highlighting will disappear and upon releasing the left mouse key the section will be disonnected (see the video).

За повече информация, моля вижте: Editing pipe feeds in a radiant system - Good practices and use cases

Manual arrangement of pipe feeds

Трасе на тръбни серпентини - manual correction of automatically generated pipe feeds route

Automatic generation of pipe feeds can be disabled in the pop-up menu of Трасе на тръбни серпентини available upon right clicking. This implies:

disabling automatic division of Отоплителна/Охладителна зона (a relevant message is displayed),
disabling that mode also for subsequent sections of Трасе на тръбни серпентини,
loss of manual settings of properties made for this section (these sections) of Трасе на тръбни серпентини.

Automatic generation of pipe feeds can be enabled at any moment of project creation.

Pipe feeds - manual arrangement of pipe feeds using a Pipe-run pair

It is recommended to arrange pipe feeds manually after the Отоплителна/Охладителна зона is finally divided into Отоплителна/охладителна повърхностs. Connecting a Отоплителна/Охладителна зона using a pipe-run pair disables the automatic division of Отоплителна/Охладителна зона.

Additional information

Conflicts between automatically and manually arranged pipe feeds are not checked and are not diagnosed by the program.

@@ Ред 5: / Ред 5: @@
 |p4                 =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy3="-->
 |category1          =InstalSystem 5#Functionalities
-|category_name1     =FUNCTIONALITY
+|category_name1     =FUNCTION AND TOOL
 |c2                 =<!--Jest kategoria -> zamienić na: "category2=" i uzupełnić link do sekcji kategorii na stronie głównej produktu-->
 |category_name2     =<!--podać nazwę kategorii-->
 |c3                 =<!--Jest kategoria -> zamienić na: "category3=" i uzupełnić link do sekcji kategorii na stronie głównej produktu-->
 |category_name3     =<!--podać nazwę kategorii "ZASTOSOWANIE"/"FUNKCJONALNOŚĆ"/...-->
-|version1           =[[Release notes InstalSystem 5#Version BETA 22 Rev. 15.10.2|IS 5.0 Beta 22]]
+|version1           =[[Release notes InstalSystem 5#Version BETA 33 Rev. 0.0.B33|IS 5.0 Beta 33]]
 |v2                 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
 |v3                 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
@@ Ред 17: / Ред 17: @@
 <!--Case 109995-->
 ==Description==
-Editing of pipe feeds may be automated to a high degree. ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' is a component inserted by the user into the project to connect ''<IS_TS id=strRHConstructionTitle/>'' type components with component ''<IS_TS id=iName2Rozdz/>''. Based on the arrangement and settings of ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' components, when performing calculations the program automatically generates a set of components of the ''<IS_TS id=iNameOPDzialka/>'' type, taking into account the number of connected ''<IS_TS id=strPGCh/>'' components. That number is the result of dividing ''<IS_TS id=strRHConstructionTitle/>'' into loops, which may be either done automatically or specified by the user. ''<IS_TS id=iNameOPDzialka/>'' may also be edited manually.
+The ''<IS_TS id=iNameOPDzialka/>'' components connect ''<IS_TS id=iNameRozdzielaczPure/>'' with proper ''<IS_TS id=PowGrzewczoChlodzaca/>'' components. The ''<IS_TS id=iNameOPDzialka/>'' components can be generated automatically in the required number and  with maintained pipe spacing using the ''<IS_TS id=rpStrefaPrzylaczy/>'' component. Alternatively, pipe feeds can be arranged manually using the ''<IS_TS id=iNameDzialka/>'' component.
 ==Location in the program==
-* ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' is available in section ''<IS_TS id=NazwaZakladkaOP/>'' on the ''<IS_TS id=NarzedziaGlowne/>'' toolbar, for the active editing scopes ''<IS_TS id=ScopeInstalacjePodlogoweIScienneShort/>'' or ''<IS_TS id=ScopeInstalacjeSufitoweShort/>''.
+* '''''<IS_TS id=iNameOPStrefaPrzylaczy/>''''' is available in section ''<IS_TS id=NazwaZakladkaOP/>'' on the ''<IS_TS id=NarzedziaGlowne/>'' toolbar, for the active editing scopes ''<IS_TS id=ScopeInstalacjePodlogoweIScienneShort/>'' or ''<IS_TS id=ScopeInstalacjeSufitoweShort/>''.
-[[File:Pipe-feed-location.png|900 px|left|thumb|1. <IS_TS id=iNameOPStrefaPrzylaczy/>]]<br clear="all"/>
+[[File:TB-pipe-feeds-location.PNG|900 px|left|thumb|1. <IS_TS id=iNameOPStrefaPrzylaczy/>]]<br clear="all"/>
-* Component ''<IS_TS id=iNameOPDzialka/>'' enables manual arrangement. ''<IS_TS id=iNameOPDzialka/>'' is available in section ''<IS_TS id=NazwaZakladkaOP/>'' on the ''<IS_TS id=NarzedziaGlowne/>'' toolbar, for the active editing scopes ''<IS_TS id=ScopeInstalacjePodlogoweIScienneShort/>'' or ''<IS_TS id=ScopeInstalacjeSufitoweShort/>''.
+* The '''''<IS_TS id=iNameDzialka/>''''' component is available in the ''<IS_TS id=RozprowadzenieCieplne/>'' section on the ''<IS_TS id=NarzedziaGlowne/>'' toolbar for the enabled editing scopes: ''<IS_TS id=ScopeInstalacjePodlogoweIScienneShort/>'', ''<IS_TS id=ScopeInstalacjeSufitoweShort/>'' or ''<IS_TS id=ScopeInstalacjeKonwekcyjneShort/>''.<br/>The ''<IS_TS id=iNameOPDzialka/>'' component is inserted using the ''<IS_TS id=iNameDzialka/>'' or ''Pipe run pair'' component. Distinguishing between ''<IS_TS id=iNameOPDzialka/>'' and ''<IS_TS id=iNameDzialka/>'' is done automatically depending on whether it is connected to a ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' or to other component.
-[[File:Manual-pipe-feed-location.png|900 px|left|thumb|2. Manual placing of <IS_TS id=iNameOPDzialka/>]]<br clear="all"/>
+[[File:TB-pipe-run-location.PNG|900 px|left|thumb|2. ''<IS_TS id=iNameDzialka/>'']]<br clear="all"/>
-* ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' can be switched between automatic and manual mode by right clicking the mouse and selecting the desired mode.
-[[File:Suf-loops-popup-menu.png|500 px|left|thumb|3. Switching <IS_TS id=iNameOPStrefaPrzylaczy/> into active/inactive mode]]<br clear="all"/>
 ==Example of use==
-===Pipe feeds route automatical drawing===
+===''<IS_TS id=rpStrefaPrzylaczy/>'' - automatic generation of pipe feeds===
-{{#ev:youtube|ol-CunRLM_Q|900||||rel=0}}<br>
-===Manual pipe feeds editing===
+====Important properties====
-{{#ev:youtube|COSP1w0r_TA|900||||rel=0}}<br>
+# '''Number of generated pipe feed pairs''' - the program automatically generates the number of required pipe feed pairs depending on the number of ''<IS_TS id=PowGrzewczoChlodzaca/>s'' formed after division of the connected ''<IS_TS id=iNameOPStrefaPowGrzejnych/>''.
+# '''Pipe feed orientation in relation to section of pipe feed route''' - indicates on which side of the section of ''<IS_TS id=rpStrefaPrzylaczy/>'' should the pipe feeds be generated.
+# '''''<IS_TS id=MaksSzerPasa/>'''''
+#* ''<IS_TS id=WgIlosciPrzyl/>'' - maximum width of the band within which the generated pipe feeds are arranged will depend on the number of the required pipe feed pairs.
+#* ''<IS_TS id=strNarzucone/>'' - maximum width of the band within which the generated pipe feeds are arranged will be as specified by the user.
+# '''''<IS_TS id=OdstepUkladaniaDoSPG/>'''''
+#* ''<IS_TS id=FromSPG/>'' - spacing of the generated pipe feeds will correspond to the pipe spacing in ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' across which the ''<IS_TS id=rpStrefaPrzylaczy/>'' runs.
+#* ''<IS_TS id=wgDanychOgolnych/>'' - spacing of the generated pipe feeds will correspond to the settings in the ''<IS_TS id=rsDanogi/>'' window.
+#* ''<IS_TS id=strNarzucone/>'' - the adopted pipe spacing will be the closest to the specified value available in the ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' system across which the ''<IS_TS id=rpStrefaPrzylaczy/>'' runs.
+# '''''<IS_TS id=OdstepUkladaniaWSPG/>''''' - spacing of the generated pipe feeds to be arranged in ''<IS_TS id=PowGrzewczoChlodzaca/>'' to which the ''<IS_TS id=rpStrefaPrzylaczy/>'' leads.
+# '''''<IS_TS id=strIzolacja/>''''' - pipe feed insulation.
+# '''''<IS_TS id=strcolProcentMocy/>''''' - percentage of utilized output of pipe feeds running across the ''<IS_TS id=iNameOPStrefaPowGrzejnych/>''.
+<br/>{{#ev:youtube|3KAkjN9QmsI|900||||rel=0}}
+====Connecting to ''<IS_TS id=iNameRozdzielaczPure/>''====
+The first segment of ''<IS_TS id=rpStrefaPrzylaczy/>'' should be connected to any point on the axis of the manifold (between the flow rail and return rail). Pipe feeds will be generated automatically in proper sequence and with min. spacing coresponding to the distance between connection points on the manifold rail.
+====Arranging the ''<IS_TS id=rpStrefaPrzylaczy/>''====
+The arranging of ''<IS_TS id=rpStrefaPrzylaczy/>'' is facilitated by using the operating modes ''<IS_TS id=strORTOModeName/>'' and ''<IS_TS id=strAUTOModeName/>'' and the ''SHIFT'' key.<br/>{{#ev:youtube|0rAS1k8GhN8|900||||rel=0}}
+====Connecting to ''<IS_TS id=iNameOPStrefaPowGrzejnych/>''====
+Point of connection of ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' to ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'', the so-called "wifi" antenna - indicates the point where the specified ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' is connected to ''<IS_TS id=iNameOPStrefaPrzylaczy/>''.
+* '''Correction of connection of ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' with ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'''''.<br/>After making proper connection within the connected ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'', a "wifi" antenna symbol appears. If there is no "wifi" antenna symbol at the connection point, drag the hot-point at the end of the ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' section with the left mouse button pressed to within the ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' area until green highlighting appears. Release the left mouse button. It is possible to connect one section of ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' to the corner of several adjacent ''<IS_TS id=iNameOPStrefaPowGrzejnych/>s'' (see the video).
+* '''Disconnecting ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' from ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'''''.<br/>If the connection point has been set improperly, it can be modified manually. To disconnect ''<IS_TS id=iNameOPStrefaPrzylaczy/>'', follow the operations described above with the SHIFT key pressed - the green highlighting will disappear and upon releasing the left mouse key the section will be disonnected (see the video).
+{{#ev:youtube|Boomvt9_DJ0|900||||rel=0}}<br/>{{Info}} [[Editing pipe feeds in a radiant system - Good practices and use cases|Editing pipe feeds in a radiant system - Good practices and use cases]]
+===Manual arrangement of pipe feeds===
+====''<IS_TS id=rpStrefaPrzylaczy/>'' - manual correction of automatically generated pipe feeds route====
+Automatic generation of pipe feeds can be disabled in the pop-up menu of ''<IS_TS id=rpStrefaPrzylaczy/>'' available upon right clicking. This implies:
+* disabling automatic division of ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' (a relevant message is displayed),
+* disabling that mode also for subsequent sections of ''<IS_TS id=rpStrefaPrzylaczy/>'',
+* loss of manual settings of properties made for this section (these sections) of ''<IS_TS id=rpStrefaPrzylaczy/>''.
+Automatic generation of pipe feeds can be enabled at any moment of project creation.
+{{#ev:youtube|fXHLBQqLJHs|900||||rel=0}}
+====''Pipe feeds'' - manual arrangement of pipe feeds using a ''Pipe-run pair''====
+* It is recommended to arrange pipe feeds manually after the ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' is finally divided into ''<IS_TS id=PowGrzewczoChlodzaca/>s''. Connecting a ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' using a pipe-run pair disables the automatic division of ''<IS_TS id=iNameOPStrefaPowGrzejnych/>''.
 ==Additional information==
-<p> Important properties of ''<IS_TS id=iNameOPStrefaPrzylaczy/>'':
+* Conflicts between automatically and manually arranged pipe feeds are not checked and are not diagnosed by the program.
-* ''<IS_TS id=iNameOPDzialka/>'' '''laying direction''' in relation to ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' can be determined by altering the arrangement of arrows.
-* '''''<IS_TS id=OdstepUkladaniaDoSPG/>''''' of ''<IS_TS id=iNameOPDzialka/>'' generated by means of ''<IS_TS id=iNameOPStrefaPrzylaczy/>'' can be determined automatically or specified by the user (appropriate field in the ''<IS_TS id=DataEditorTable/>'' window).
+[[pl:Edycja przyłączy dla systemu płaszczyznowego]]
-* '''''<IS_TS id=MaksSzerPasa/>''''' of pipe feed laying specified by the user changes the value of ''<IS_TS id=strOdstepUkladania/>'' after calculations are made, so that all components of the ''<IS_TS id=iNameOPDzialka/>'' type are arranged within the defined band.<br/>{{#ev:youtube|3KAkjN9QmsI|900||||rel=0}}
-* '''Number of generated components''' of the ''<IS_TS id=iNameOPDzialka/>'' type is automatically adapted to the number of connected ''<IS_TS id=strPGCh/>'' components.<br/>{{#ev:youtube|Cy17ra9JG8c|900||||rel=0}}
 [[it:Modifica dei tubi di alimentazione per sistemi radianti]]
-[[pl:Edycja przyłączy dla systemu płaszczyznowego]]
 [[lt:Pajungimų redagavimas spindulinėje sistemoje]]
-[[bg:Редактиране на тръбни серпентини в лъчиста система]]
+[[zh-cn:编辑辐射系统中的引线管]]
 [[Category:InstalSystem 5]]
-[[Category:FUNCTIONALITY]]
+[[Category:FUNCTION AND TOOL]]

Редактиране на тръбни серпентини в лъчиста система: Разлика между версии

Версия от 09:26, 11 ноември 2017

Съдържание

Description

Location in the program

Example of use